WhatsApp Support No:
0Cart

Sort by:
from A to Z
128
1 Bearing Compression Bit 12.7 x 28.6 x 6.35shank
Out of stock
R1490.00
(Including tax)
Professional Range Solid Tungsten Compression Bit with top and bottom bearing. Dimensions in mm Diameter= 12.7
Shank Size1/2" Sub-CategoriesLock Mitre Bits
2 Bearing Compression Bit 19.05 x 38.1 x 12.7shank
Out of stock
R1895.00
(Including tax)
Professional Range Solid Tungsten Compression Bit with top and bottom bearing. Dimensions in mm Diameter= 19.05
Shank Size1/2" Sub-CategoriesLock Mitre Bits
2 Bearing Compression Bit 6.35 x 25.4 x 6.35shank
Out of stock
R747.00
(Including tax)
Professional Range Solid Tungsten Compression Bit with top and bottom bearing. Dimensions in mm Diameter= 6.35
Shank Size1/2" Sub-CategoriesLock Mitre Bits
2 Bearing Compression Bit 6.35 x 31.75 x 6.35shank
Out of stock
R822.00
(Including tax)
Professional Range Solid Tungsten Compression Bit with top and bottom bearing. Dimensions in mm Diameter= 6.35
Shank Size1/2" Sub-CategoriesLock Mitre Bits
2 Bearing Compression Bit 6.35 x 38.1 x 6.35shank
Out of stock
R822.00
(Including tax)
Professional Range Solid Tungsten Compression Bit with top and bottom bearing. Dimensions in mm Diameter= 6.35
Shank Size1/2" Sub-CategoriesLock Mitre Bits
3 Bearing Compression Bit 12.7 x 25.4 x 6.35shank
Out of stock
R1490.00
(Including tax)
Professional Range Solid Tungsten Compression Bit with top and bottom bearing. Dimensions in mm Diameter= 12.7
Shank Size1/2" Sub-CategoriesLock Mitre Bits
3 Wing Ogee Cutter
3 Wing Ogee Cutter
In stock
R1720.00
(Including tax)
Pro-Tech 3 Wing Cutter Ogee Tungsten Carbide - 3 Wing The cutter Is designed to be used with a stationary spindle molder equipped with either a 3/4"  / 1/2" spindle shaft. This cutter can be configured to cut ogee profiles. Important: Make sure the spindle molder has a table...
3/8 x 1/2 Pierce & Round Over Bit 1/2"Sh
In stock
R906.00
(Including tax)
This very special router bit is a round over bit with a slightly longer straight cutting edge at the bottom. Round overs are classified by the radius they cut. A ½ inch radius bit 
Shank Size1/2" Sub-CategoriesRound-Over Bits
45° Lock Mitre Joint Bit 67x30x69 12.7Sh
In stock
R3829.00
(Including tax)
Professional Range Tungsten Router Bits a=45 degrees D=67mm B=30mm L=69mm d=12.7mm
Shank Size1/2" Sub-CategoriesLock Mitre Bits
Beading Bit 25.4x11x50x6.35Sh R6.3 (Bearing)
In stock
R521.00
(Including tax)
Professional Range Tungsten Router Bits D=25.4mm B=11mm L=50mm d=6.35mm R=6.3
Shank Size1/4" Sub-CategoriesBeading Bits
Beading Bit 25.4x11x61x12.7Sh R6.3 (Bearing)
In stock
R578.00
(Including tax)
Professional Range Tungsten Router Bits D=25.4mm B=11mm L=61mm d=12.7mm R=6.3
Shank Size1/2" Sub-CategoriesBeading Bits
Beading Bit 31.8x16x54x6.35Sh R9.5 (Bearing)
In stock
R639.00
(Including tax)
Professional Range Tungsten Router Bits D=31.8mm B=16mm L=54mm d=6.35mm R=9.5
Shank Size1/4" Sub-CategoriesBeading Bits
Bevel Trim Bit 11x51x6.35Sh 45°
In stock
R663.00
(Including tax)
Professional Range Tungsten Router Bits a=45 degrees B=11mm L=51mm d=6.35mm
Shank Size1/4" Sub-CategoriesBevel Trim Bits
Bevel Trim Bit 11x51x6.35Sh 45° 3Fl
In stock
R720.00
(Including tax)
Professional Range Tungsten Router Bits a=45 degrees B=11mm L=51mm d=6.35mm 3 Flutes
Shank Size1/4" Sub-CategoriesBevel Trim Bits
Chipbreaker Compression Spiral 10x30/95x12.7sh Z=2+2
In stock
R780.00
(Including tax)
Chipbreaker Compression Spiral 10x30x12.7shx95 2Flute 10mm Diameter 30mm Cutting Length ( Suitable up to 32mm wood) 12.7mm Shank Diameter 95mm Overall Length 2 Cutting wings ( Flutes) 2 Upcut & 2 Down Cut
Sub-Categories Wood Chipbreaker compression Cutting Length32
Chipbreaker Compression Spiral 6x22/77x12.7sh Z=2+2
In stock
R590.00
(Including tax)
Chipbreaker Compression Spiral 6x22x12.7shx77 2Flute 6mm Diameter 22mm Cutting Length  ( Suitable up to 23mm wood) 12.7mm Shank Diameter 77mm Overall Length 2 Cutting wings ( Flutes) 2 Upcut & 2 Down Cut
Sub-Categories Wood Chipbreaker compression Cutting Length22
Chipbreaker Compression Spiral 8x22/84x12.7sh Z=2+2
In stock
R590.00
(Including tax)
Chipbreaker Compression Spiral 8x22x12.7shx84 2Flute 8mm Diameter 22mm Cutting Length  ( Suitable up to 23mm wood) 12.7mm Shank Diameter 84mm Overall Length 2 Cutting wings ( Flutes) 2 Upcut & 2 Down Cut
Sub-Categories Wood Chipbreaker compression Cutting Length22
Chipbreaker Compression Spiral 8x30/95x12.7sh Z=2+2
In stock
R690.00
(Including tax)
Chipbreaker Compression Spiral 8x30x12.7shx95 2Flute 8mm Diameter 30mm Cutting Length  ( Suitable up to 32mm wood) 12.7mm Shank Diameter 95mm Overall Length 2 Cutting wings ( Flutes) 2 Upcut & 2 Down Cut
Sub-Categories Wood Chipbreaker compression Cutting Length32
Classical Bit 3/4" X 1/2" With Top Bearing 1/4" Sh
In stock
R665.00
(Including tax)
Shank Size1/4" Sub-CategoriesClassical Bits
Classical Core Bit 12.7x9x41x6.35Sh R6.3
In stock
R435.00
(Including tax)
Professional Range Tungsten Router Bit D=12.7mm B=9.0mm L=41mm d=6.35mm R6.3
Shank Size1/4" Sub-CategoriesCore Box Bits
Classical Core Bit 12.7x9x54x12.7Sh R6.3
In stock
R616.00
(Including tax)
Professional Range Tungsten Router Bit D=12.7mm B=9.0mm L=54mm d=12.7mm R=6.3
Shank Size1/2" Sub-CategoriesCore Box Bits
Classical Core Bit 16.0x9.5x51x12.7Sh R8.0
Out of stock
R496.00
(Including tax)
Professional Range Tungsten Router Bit D=16mm B=9.5mm L=51mm d=12.7mm R=8.0
Shank Size1/2" Sub-CategoriesCore Box Bits
Classical Core Bit 19.0x11x52x12.7Sh R9.5
In stock
R557.00
(Including tax)
Professional Range Tungsten Router Bits D=19mm B=11mm L=52mm d=12.7mm R=9.5
Shank Size1/2" Sub-CategoriesCore Box Bits
Classical Core Bit 6.3x5.5x42x6.35Sh R3.2
In stock
R388.00
(Including tax)
Professional Range Tungsten Router Bit D=6.35mm B=5.5mm L=42mm d=6.35mm R=3.2
Shank Size1/4" Sub-CategoriesCore Box Bits
Classical Core Bit 8.0x6x38x6.35Sh R4.0
In stock
R496.00
(Including tax)
Professional Range Tungsten Router Bits D=8.0mm B=6.0mm L=38mm d=6.35mm R=4.0
Shank Size1/4" Sub-CategoriesCore Box Bits
Classical Core Bit 9.5x6x38x6.35Sh R4.8
In stock
R539.00
(Including tax)
Professional Range Tungsten Router Bits D=9.5mm B=6.0mm L=38mm d=6.35mm R=4.8
Shank Size1/4" Sub-CategoriesCore Box Bits
Classical Core Bit 9.5x6x51x12.7Sh R4.8
In stock
R537.00
(Including tax)
Professional Range Tungsten Router Bit D=9.5mm B=6.0mm L=51mm d=12.7mm R=4.8
Shank Size1/2" Sub-CategoriesCore Box Bits
Classical Cove & Bead Bit 35.0x17x65x12.7Sh R6.3/R5.0
In stock
R866.00
(Including tax)
Professional Range Tungsten Router Bits D=35mm B=17mm L=65mm d=12.7mm R=5.0 R1=6.3
Shank Size1/4" Sub-CategoriesBeading Bits
Classical Cove 1 3/16" X 9/16" Radius 1/4" 1/2" Shank
In stock
R772.00
(Including tax)
Shank Size1/2" Sub-CategoriesClassical Bits
Classical Multi Form 1/4 Shank
In stock
R1286.00
(Including tax)
Shank Size1/4" Sub-CategoriesClassical Bits
Classical Ogee Bit 25.4x16x73x12.7Sh R5.0/6.3
In stock
R764.00
(Including tax)
Professional Range Tungsten Router D=25.4mm B=16mm L=73mm d=12.7mm R=5.0 R1=6.3
Shank Size1/2" Sub-CategoriesOgee Bits
Classical Router Bit
Classical Pattern Plunge Cutting 3/4" X 7/16" With Top Bearing 1/4" Shank
In stock
R617.00
(Including tax)
Shank Size1/4" Sub-CategoriesClassical Bits
Classical Pattern Plunge Cutting Flat Bottom 3/4" X 7/16" 1/4" Shank
In stock
R501.00
(Including tax)
Shank Size1/4" Sub-CategoriesClassical Bits
Classical Plunge Cutting 1/2" X 3/8" (3/32" Diameter) 1/4" Shank
In stock
R339.00
(Including tax)
Shank Size1/4" Sub-CategoriesClassical Bits
Classical Plunge Cutting 3/4" X 1/2" (5/32" Diameter) 1/4" Shank
In stock
R531.00
(Including tax)
Shank Size1/4" Sub-CategoriesClassical Bits
Compression Bit 10x22x10x80 Z=2
In stock
R798.00
(Including tax)
10x22x10x80 Z=2
Sub-Categories Wood Compression Spirals Cutting Length22
Compression Bit 10X22X10X80 Z=3
In stock
R898.00
(Including tax)
10x22x10x80 Z=2
Sub-Categories Wood Compression Spirals Cutting Length22
Compression Bit 10x32x10x80 Z=2
Out of stock
R840.00
(Including tax)
10x32x10x80 Z=2
Sub-Categories Wood Compression Spirals Cutting Length32
Compression Bit 10X32X10X80 Z=3
In stock
R980.00
(Including tax)
10x32x10x80 Z=3
Sub-Categories Wood Compression Spirals Cutting Length32
Compression Bit 12x22x10x80 Z=2
In stock
R1098.00
(Including tax)
Compression Bit 12x22x12x80 Z=2 12mm Diameter 22mm Cutting Length 12mm Shank Diameter 80mm Overall Length 2 Cutting wings ( Flutes)
Sub-Categories Wood Compression Spirals Cutting Length22
Compression Bit 12x22x12x80 Z=3
In stock
R1198.00
(Including tax)
Compression Bit 12x22x12x80 Z=3 12mm Diameter 22mm Cutting Length 12mm Shank Diameter 80mm Overall Length 3 Cutting wings ( Flutes)
Sub-Categories Wood Compression Spirals Cutting Length22
Compression Bit 12x32x10x80 Z=2
Out of stock
R1198.00
(Including tax)
Compression Bit 12x32x12x80 Z=3 12mm Diameter 32mm Cutting Length 12mm Shank Diameter 80mm Overall Length 2 Cutting wings ( Flutes)
Sub-Categories Wood Compression Spirals Cutting Length32
Compression Bit 12x32x10x80 Z=3
In stock
R1298.00
(Including tax)
Compression Bit 12x32x12x80 Z=3 12mm Diameter 32mm Cutting Length 12mm Shank Diameter 80mm Overall Length 3 Cutting wings ( Flutes)
Sub-Categories Wood Compression Spirals Cutting Length32
Compression Bit 3/8x22x3/8x75 Z=2
In stock
R798.00
(Including tax)
Compression Bit 9.5x22x9.5x80 Z=3 10mm Diameter 22mm Cutting Length 9.5mm Shank Diameter 80mm Overall Length 3 Cutting wings ( Flutes)
Sub-Categories Wood Compression Spirals Cutting Length22
Compression Bit 3/8x22x3/8x75 Z=3
In stock
R898.00
(Including tax)
Compression Bit 9.5x22x9.5x80 Z=2 10mm Diameter 22mm Cutting Length 9.5mm Shank Diameter 80mm Overall Length 2 Cutting wings ( Flutes)
Sub-Categories Wood Compression Spirals Cutting Length22
Compression Bit 3/8x32x3/8x75 Z=2
Out of stock
R1198.00
(Including tax)
Compression Bit 9.5x32x9.5x80 Z=3 10mm Diameter 32mm Cutting Length 9.5mm Shank Diameter 80mm Overall Length 2 Cutting wings ( Flutes)
Sub-Categories Wood Compression Spirals Cutting Length32
Compression Bit 3/8x32x3/8x75 Z=3
In stock
R1298.00
(Including tax)
Compression Bit 9.5x32x9.5x80 Z=3 10mm Diameter 32mm Cutting Length 9.5mm Shank Diameter 80mm Overall Length 3 Cutting wings ( Flutes)
Sub-Categories Wood Compression Spirals Cutting Length32
Compression Bit 6.35x22x6.35x75 Z=2
Out of stock
Compression Bit 6.35x22x6.35x75 Z=2 6.35mm Diameter 22mm Cutting Length 6.35mm Shank Diameter 75mm Overall Length 2 Cutting wings ( Flutes)
Sub-Categories Wood Compression Spirals Cutting Length22
Compression Bit 8x25x8x70 Z=2
Out of stock
Compression Bit 8x25x8x70 Z=2 8mm Diameter 25mm Cutting Length 8mm Shank Diameter 70mm Overall Length 2 Cutting wings ( Flutes)
Sub-Categories Wood Compression Spirals Cutting Length25
Core Box Bit 12.7x32x73x12.7Sh R6.3
In stock
R1090.00
(Including tax)
Professional Range Tungsten Router Bit D=12.7mm B=32mm L=73mm d=12.7mm R=6.3
Shank Size1/2" Sub-CategoriesCore Box Bits
Core Box Bit 25.4x32x70x12.7Sh R12.7
In stock
R1511.00
(Including tax)
Professional Range Tungsten Router Bit D=25.4mm B=32mm L=70mm d=12.7mm R=12.7mm
Shank Size1/2" Sub-CategoriesCore Box Bits
Core Box Bit 4.8x13x47x6.35Sh R2.4
In stock
R520.00
(Including tax)
Professional Range Tungsten Router Bit D=4.8mm B=13mm L=47mm d=6.35mm R=2.4
Shank Size1/4" Sub-CategoriesCore Box Bits
Core Box Bit 6.3x13x47x6.35Sh R3.2
In stock
R520.00
(Including tax)
Professional Range Tungsten Router Bit D=6.3mm B=13mm L=47mm d=6.35mm R=3.2
Shank Size1/4" Sub-CategoriesCore Box Bits
Core Box Bit 8.0x13x47x6.35Sh R4.0
In stock
R584.00
(Including tax)
Professional Range Tungsten Router Bit D=8.0mm B=13mm L=47mm d=6.35mm R=4.0
Shank Size1/4" Sub-CategoriesCore Box Bits
Corner Rounding 1 1/4" X 5/8" (3/8" Radius) 1/4" Sh
In stock
R551.00
(Including tax)
Shank Size1/4" Sub-CategoriesRound-Over Bits
Counter Sink Drill 2.4x9.5x63mm
In stock
R340.00
(Including tax)
Carbide Tipped Countersinks HSS drill included. Quick-Change 1/4” (6.3mm) HEX shank.
Sub-CategoriesCounter-Sink Drill
Counter Sink Drill 2.5x9.5x63mm
In stock
R340.00
(Including tax)
Carbide Tipped Countersinks HSS drill included. Quick-Change 1/4” (6.3mm) HEX shank.
Sub-CategoriesCounter-Sink Drill
Counter Sink Drill 2.8x9.5x63mm
In stock
R340.00
(Including tax)
Carbide Tipped Countersinks HSS drill included. Quick-Change 1/4” (6.3mm) HEX shank.
Sub-CategoriesCounter-Sink Drill
Counter Sink Drill 2x9.5x63mm
In stock
R340.00
(Including tax)
Carbide Tipped Countersinks HSS drill included. Quick-Change 1/4” (6.3mm) HEX shank.
Sub-CategoriesCounter-Sink Drill
Counter Sink Drill 3.2x9.5x63mm
In stock
R350.00
(Including tax)
Carbide Tipped Countersinks HSS drill included. Quick-Change 1/4” (6.3mm) HEX shank.
Sub-CategoriesCounter-Sink Drill
Counter Sink Drill 3.5x9.5x63mm
In stock
R357.00
(Including tax)
Carbide Tipped Countersinks HSS drill included. Quick-Change 1/4” (6.3mm) HEX shank.
Sub-CategoriesCounter-Sink Drill
Counter Sink Drill 3.6x12.7x63mm
In stock
R357.00
(Including tax)
Carbide Tipped Countersinks HSS drill included. Quick-Change 1/4” (6.3mm) HEX shank.
Sub-CategoriesCounter-Sink Drill
Counter Sink Drill 3x9.5x63mm
Out of stock
R340.00
(Including tax)
Carbide Tipped Countersinks HSS drill included. Quick-Change 1/4” (6.3mm) HEX shank.
Sub-CategoriesCounter-Sink Drill
Counter Sink Drill 4.8x12.7x63mm
In stock
R452.00
(Including tax)
Carbide Tipped Countersinks HSS drill included. Quick-Change 1/4” (6.3mm) HEX shank.
Sub-CategoriesCounter-Sink Drill
Counter Sink Drill 4x9.5x63mm
In stock
R357.00
(Including tax)
Carbide Tipped Countersinks HSS drill included. Quick-Change 1/4” (6.3mm) HEX shank.
Sub-CategoriesCounter-Sink Drill
Counter Sink Drill 5x12.7x63mm
In stock
R557.00
(Including tax)
Carbide Tipped Countersinks HSS drill included. Quick-Change 1/4” (6.3mm) HEX shank.
Sub-CategoriesCounter-Sink Drill
Counter Sink Drill 6x12.7x63mm
In stock
R557.00
(Including tax)
Carbide Tipped Countersinks HSS drill included. Quick-Change 1/4” (6.3mm) HEX shank.
Sub-CategoriesCounter-Sink Drill
Countersink 2/9.5x60mm with Depth Stop
In stock
R561.00
(Including tax)
Countersink with Low friction Depth-Stop Antifriction polymer Collar. HSS drill included. Quick-Change 1/4” (6.3mm) HEX shank ------------------------------------------------------- For clean surface and simple depth control. No scratches! No burn marks! Unique adjustable...
Sub-CategoriesCounter-Sink Drill
Countersink 3/9.5x60mm with Depth Stop
In stock
R570.00
(Including tax)
Countersink with Low friction Depth-Stop Antifriction polymer Collar. HSS drill included. Quick-Change 1/4” (6.3mm) HEX shank ------------------------------------------------------- For clean surface and simple depth control. No scratches! No burn marks! Unique adjustable...
Sub-CategoriesCounter-Sink Drill
Countersink 4/9.5x60mm with Depth Stop
In stock
R582.00
(Including tax)
Countersink with Low friction Depth-Stop Antifriction polymer Collar. HSS drill included. Quick-Change 1/4” (6.3mm) HEX shank ------------------------------------------------------- For clean surface and simple depth control. No scratches! No burn marks! Unique adjustable...
Sub-CategoriesCounter-Sink Drill
Countersink 5/9.5x60mm with Depth Stop
In stock
R663.00
(Including tax)
Countersink with Low friction Depth-Stop Antifriction polymer Collar. HSS drill included. Quick-Change 1/4” (6.3mm) HEX shank ------------------------------------------------------- For clean surface and simple depth control. No scratches! No burn marks! Unique adjustable...
Sub-CategoriesCounter-Sink Drill
Countersink 6/9.5x60mm with Depth Stop
In stock
R690.00
(Including tax)
Countersink with Low friction Depth-Stop Antifriction polymer Collar. HSS drill included. Quick-Change 1/4” (6.3mm) HEX shank ------------------------------------------------------- For clean surface and simple depth control. No scratches! No burn marks! Unique adjustable depth-stops
Sub-CategoriesCounter-Sink Drill
Cove Bit 35x16x12.7Sh R12.7
In stock
R917.00
(Including tax)
Professional Range Tungsten Router Bit Dimensions in mm  D=35
Shank Size1/4" Sub-CategoriesCove Bits
Double Round Bit 1 1/2" X 11/16" Radius 3/16" 1/4" Sh
In stock
R998.00
(Including tax)
Shank Size1/4" Sub-CategoriesClassical Bits
Dovetail Bit 3/8" X 3/8"x 1/4"shank
In stock
R209.00
(Including tax)
Shank Size1/4" Sub-CategoriesDovetail Bits
Engraving Bit 0.1x14x58 1/4"Sh 30°
In stock
R721.00
(Including tax)
Professional Range Tungsten Router Bits Dimensions in mm a=30 degrees
Shank Size1/4" Sub-CategoriesEngraving Bits
Engraving Bit 0.25x14x58 1/4"Sh 30°
In stock
R721.00
(Including tax)
Professional Range Tungsten Router Bits  Dimensions in mm a=30 degrees
Shank Size1/4" Sub-CategoriesEngraving Bits
Engraving Bit 0.75x14x58 1/4"Sh 30°
In stock
R721.00
(Including tax)
Professional Range Tungsten Router Bits  Dimensions in mm a=30 degrees
Shank Size1/4" Sub-CategoriesEngraving Bits
Engraving Bit 1.0x14x58 1/4"Sh 30°
In stock
R721.00
(Including tax)
Professional Range Tungsten Router Bits  Dimensions in mm a=30 degrees
Shank Size1/4" Sub-CategoriesEngraving Bits
Engraving Bit 1.5x14x58 1/4"Sh 30°
In stock
R721.00
(Including tax)
Professional Range Tungsten Router Bits Dimensions in mm  a=30 degrees
Shank Size1/4" Sub-CategoriesEngraving Bits
Engraving Bit 2.5x14x58 1/4"Sh 30°
In stock
R721.00
(Including tax)
Professional Range Tungsten Router Bits  Dimensions in mm a=30 degrees
Shank Size1/4" Sub-CategoriesEngraving Bits
Finger Grip Bit 31.8x12x12.7S R4.8/R2.5
In stock
R1614.00
(Including tax)
Professional Range Tungsten Router Bits  Dimensions in mm C=8.0
Shank Size1/2" Sub-CategoriesFinger Grip Bits
Finger Grip Bit 35x20x12.7S Z=2
Out of stock
R1289.00
(Including tax)
Shank Size1/2" Sub-CategoriesFinger Grip Bits
Finger Grip Bit 35x24x12.7S Z=2
Out of stock
R1289.00
(Including tax)
Shank Size1/2" Sub-CategoriesFinger Grip Bits
Finger Grip Bit 35x25x12.7S Z=2
Out of stock
R1289.00
(Including tax)
Shank Size1/2" Sub-CategoriesFinger Grip Bits
Finger Grip Bit 50x25x12.7S Z=2
Out of stock
R1890.00
(Including tax)
Shank Size1/2" Sub-CategoriesFinger Grip Bits
Finishing Spiral 10x35/75x10xZ=2 Neg Eco
In stock
R1233.95
(Including tax)
Downcut Finishing Spiral 10x35x10x75 2Flute 10mm Diameter 35mm Cutting Length 10mm Shank Diameter 75mm Overall Length 2 Cutting wings ( Flutes)
Sub-Categories Wood Down Cut Spirals - Finishing Cutting Length35
Finishing Spiral 10x35/75x10xZ=2 Pos Eco
In stock
R1244.30
(Including tax)
Upcut Finishing Spiral 10x35x10x75 2Flute 10mm Diameter 35mm Cutting Length 10mm Shank Diameter 75mm Overall Length 2 Cutting wings ( Flutes)
Sub-Categories Wood Up Cut Spirals - Finishing Cutting Length35
Finishing Spiral 3x15/60x3xZ=2 Pos Eco
In stock
R400.20
(Including tax)
Upcut Finishing Spiral 3x15x3x60 2Flute 3mm Diameter 15mm Cutting Length 3mm Shank Diameter 60mm Overall Length 2 Cutting wings ( Flutes)
Sub-Categories Wood Up Cut Spirals - Finishing Cutting Length15
Finishing Spiral 3x15/60x6xZ=2 Pos Eco
In stock
R696.90
(Including tax)
Upcut Finishing Spiral 3x15x6x60 2Flute 3mm Diameter 15mm Cutting Length 6mm Shank Diameter 60mm Overall Length 2 Cutting wings ( Flutes)
Sub-Categories Wood Up Cut Spirals - Finishing Cutting Length15
Finishing Spiral 4x15/60x4xZ=2 Neg Eco
In stock
R412.85
(Including tax)
Downcut Finishing Spiral 4x15x4x60 2Flute 4mm Diameter 15mm Cutting Length 4mm Shank Diameter 60mm Overall Length 2 Cutting wings ( Flutes)
Sub-Categories Wood Down Cut Spirals - Finishing Cutting Length15
Finishing Spiral 4x15/60x4xZ=2 Pos Eco
In stock
R391.00
(Including tax)
Upcut Finishing Spiral 4x15x4x60 2Flute 4mm Diameter 15mm Cutting Length 4mm Shank Diameter 60mm Overall Length 2 Cutting wings ( Flutes)
Sub-Categories Wood Up Cut Spirals - Finishing Cutting Length15
Finishing Spiral 4x15/60x6xZ=2 Pos Eco
In stock
R644.00
(Including tax)
Upcut Finishing Spiral 4x15x6x60 2Flute 4mm Diameter 15mm Cutting Length 6mm Shank Diameter 60mm Overall Length 2 Cutting wings ( Flutes)
Sub-Categories Wood Up Cut Spirals - Finishing Cutting Length15
Finishing Spiral 5x15/60x6xZ=2 Pos Eco
In stock
R656.65
(Including tax)
Upcut Finishing Spiral 5x15x6x60 2Flute 5mm Diameter 15mm Cutting Length 6mm Shank Diameter 60mm Overall Length 2 Cutting wings ( Flutes)
Sub-Categories Wood Up Cut Spirals - Finishing Cutting Length15
Finishing Spiral 6x22/60x6xZ=2 Neg Eco
In stock
R552.00
(Including tax)
Downcut Finishing Spiral 6x22x6x60 2Flute 5mm Diameter 22mm Cutting Length 6mm Shank Diameter 60mm Overall Length 2 Cutting wings ( Flutes)
Sub-Categories Wood Down Cut Spirals - Finishing Cutting Length22
Finishing Spiral 6x22/60x6xZ=2 Pos Eco
In stock
R524.40
(Including tax)
Upcut Finishing Spiral 6x22x6x60 2Flute 5mm Diameter 22mm Cutting Length 6mm Shank Diameter 60mm Overall Length 2 Cutting wings ( Flutes)
Sub-Categories Wood Up Cut Spirals - Finishing Cutting Length22
Finishing Spiral 8x30/75x8xZ=2 Neg Eco
In stock
R854.45
(Including tax)
Downcut Finishing Spiral 8x30x8x75 2Flute 8mm Diameter 30mm Cutting Length 8mm Shank Diameter 75mm Overall Length 2 Cutting wings ( Flutes)
Sub-Categories Wood Down Cut Spirals - Finishing Cutting Length30
Finishing Spiral 8x30/75x8xZ=2 Pos Eco
In stock
R911.95
(Including tax)
Upcut Finishing Spiral 8x30x8x75 2Flute 8mm Diameter 30mm Cutting Length 8mm Shank Diameter 75mm Overall Length 2 Cutting wings ( Flutes)
Sub-Categories Wood Up Cut Spirals - Finishing Cutting Length30
Flush Multi-Trim Bit 19.0x51x117x12.7Sh Z=4
In stock
R1628.00
(Including tax)
Professional Range Tungsten Router Bits Dimensions in mm D=19.0
Shank Size1/2" Sub-CategoriesFlush Trim Bits
Flush Trim Bit 12.7x13x53x6.35Sh
In stock
R394.00
(Including tax)
Professional Range Tungsten Router Bits Dimensions in mm D=12.7
Shank Size1/4" Sub-CategoriesFlush Trim Bits
Flush Trim Bit 12.7x25x65x6.35Sh
In stock
R449.00
(Including tax)
Professional Range Tungsten Router Tri Dimensions in mm D=12.7
Shank Size1/4" Sub-CategoriesFlush Trim Bits
Flush Trim Bit 12.7x25x80x12.7Sh
In stock
R448.00
(Including tax)
Professional Range Tungsten Router Bits Dimensions in mm D=12.7
Shank Size1/2" Sub-CategoriesFlush Trim Bits
Flush Trim Bit 12.7x38x96x12.7Sh
In stock
R622.00
(Including tax)
Professional Range Tungsten Router Bits Dimensions in mm D=12.7
Shank Size1/2" Sub-CategoriesFlush Trim Bits
Flush Trim Bit 12.7x51x115x12.7Sh
In stock
R737.00
(Including tax)
Professional Range Tungsten Router Bits Dimensions in mm D=12.7
Shank Size1/2" Sub-CategoriesFlush Trim Bits
Flush Trim Bit 4.8x19x6.35Sh NANO
In stock
R607.00
(Including tax)
Professional Range Tungsten Router Bits Dimensions in mm D=4.8
Shank Size1/4" Sub-CategoriesFlush Trim Bits
Flush Trim Bit 6.3x25x63x6.35Sh
In stock
R482.00
(Including tax)
Professional Range Tungsten Router Bits Dimensions in mm D=6.3
Shank Size1/4" Sub-CategoriesFlush Trim Bits
Flush Trim Bit 8.0x25x66x6.35Sh
In stock
R591.00
(Including tax)
Professional Range Tungsten Router Bits Dimensions in mm D=8.0
Shank Size1/4" Sub-CategoriesFlush Trim Bits
Flush Trim Bit 9.5x13x53x6.35Sh
In stock
R401.00
(Including tax)
Professional Range Tungsten Router Bits Dimensions in mm D=9.5
Shank Size1/4" Sub-CategoriesFlush Trim Bits
Flush Trim Bit 9.5x25x65x6.35Sh
In stock
R496.00
(Including tax)
Professional Range Tungsten Router Tri Dimensions in mm D=9.5
Shank Size1/4" Sub-CategoriesFlush Trim Bits
Glass & Tiles Drill Bit 4x59mm
In stock
R141.00
(Including tax)
For use in glass
Sub-CategoriesGlass & Tiles Drill
Glass & Tiles Drill Bit 5x62mm
In stock
R149.00
(Including tax)
For use in glass
Sub-CategoriesGlass & Tiles Drill
Glass & Tiles Drill Bit 6x70mm
In stock
R155.00
(Including tax)
For use in glass
Sub-CategoriesGlass & Tiles Drill
Glue Joint Bit 47x28x66x12.7Sh
In stock
R2239.00
(Including tax)
Shank Size1/2" Sub-CategoriesGlue Joint Bits
Hobby Panel Raise Cutters 116x25x30B Z=3
Out of stock
Contact us for a price
Hobby Panel Raise Cutters 116x25x30B Z=3
Out of stock
Contact us for a price
Hobby Panel Raise Cutters 116x25x30B Z=3
Out of stock
Contact us for a price
Hobby Panel Raise Cutters 116x25x30B Z=3
Out of stock
Contact us for a price
Hollow Sq.Mort Chis&Bit 1/2 ( 12.7mm )x19.05 SH
In stock
R517.50
(Including tax)
Hss Mortising Chisel and Bit set. 5/16 (8mm)  19.05mm Chisel Shank Diameter 9.5mm Bit Shank Diameter
Hollow Sq.Mort Chis&Bit 3/8 ( 9.5mm )x19.05 SH
In stock
R517.50
(Including tax)
Hss Mortising Chisel and Bit set. 3/8  (9.5mm)  19.05mm Chisel Shank Diameter 7mm Bit Shank Diameter
Hollow Sq.Mort Chis&Bit 5/16 ( 8mm )x19.05 SH
In stock
R517.50
(Including tax)
Hss Mortising Chisel and Bit set. 5/16 (8mm)  19.05mm Chisel Shank Diameter 6mm Bit Shank Diameter
Hollow Sq.Mort Chis&Bit 5/8 ( 15.9mm )x19.05 SH
In stock
R609.50
(Including tax)
Hss Mortising Chisel and Bit set. 5/8 (15.9mm)  19.05mm Chisel Shank Diameter 12mm Bit Shank Diameter
HS Profile Knives No 0
In stock
R236.00
(Including tax)
Price shown is per knife.
HS Profile Knives No 1
In stock
R236.00
(Including tax)
Price shown is per knife.
Sub-CategoriesUniversal Profiling Knives
HS Profile Knives No 10
In stock
R236.00
(Including tax)
Price shown is per knife.
Sub-CategoriesUniversal Profiling Knives
HS Profile Knives No 100
In stock
R236.00
(Including tax)
Price shown is per knife.
Sub-CategoriesUniversal Profiling Knives
HS Profile Knives No 11
In stock
R236.00
(Including tax)
Price shown is per knife.
Sub-CategoriesUniversal Profiling Knives
HS Profile Knives No 12
In stock
R236.00
(Including tax)
Price shown is per knife.
Sub-CategoriesUniversal Profiling Knives
HS Profile Knives No 13
In stock
R236.00
(Including tax)
Price shown is per knife.
Sub-CategoriesUniversal Profiling Knives
Show another 128 products
Product filters
Drill Bit Subcategories